Windshield Removal Quick Guide

Tools and Supplies

Tools

• JIS cross-point screwdriver
  • A conventional Phillips screwdriver will work but is likely to strip the heads of the screws.
  • A suitable tool is provided as part of the pre-2006 tool kit. (Honda P/N 99003-10000, requires handle P/N 89103-538-000)
  • JIS Screwdriver sets are also available from Internet suppliers, craft and modelling shops. Most US based Auto-Parts stores have never heard of JIS.
• 8mm socket or wrench
• 10mm socket or wrench

Supplies

• Cleaning solution for the windshield
  • This is a good opportunity to clean the area where the trim pieces normally cover

Disassembly

	Remove the front and rear trim pieces JIS screws
Remove the 4 retaining bolts, whilst supporting the windshield, and remove the windshield: 8mm bolts Note the position of the rubber gasket on the back of the windshield
	Store the mounting bolts in their holes so they don't get lost. If a height adjustment is required, the 10mm bolts for this are now easily accessible under the flanges of the windshield supports.

Procedure

Reassembly

Post-Service Checkout

Related Information