r3 - 26 Nov 2016 - 13:51:07 - MarkFeitYou are here: STWiki >  ST13 Web > QuartetHarness

Quartet Harness

Pinout


Wire

Function
Non-ABS
Fuse
ABS
Fuse
Fuse
Capacity1
9-Pin White
Red/Green Unswitched 12V H J 10A
Light Green/Black Switched 12V, Ignition E F 15A
Light Blue Right Turn Signal      
Orange Left Turn Signal      
Green Ground      
3-Pin Black
Red/Green Unswitched 12V H J 10A
Light Green/Black Switched 12V, Ignition E F 15A
Green Ground      
3-Pin Red
Light Green/Black Switched 12V, Ignition E F 15A
Green Ground      
3-Pin White
Red/Black Switched 12V, Main Stop B C 15A
Green Ground      

1Note that the fuses supplying these circuits service other loads and therefore do not make their full rated current available to the harness. Additionally, ground is supplied through a single line the same size as the others. To avoid overheating the wiring and connectors, aggregate load should be kept to less than 15A and it is strongly recommended that the harness be used to supply only low-current loads.

Photo

qh.jpg

Source: http://www.st-owners.com/forums/showpost.php?p=957210&postcount=10

-- MarkFeit - 01 Dec 2005

Topic attachments
I Attachment Action Size Date Who Comment
jpgjpg qh.jpg manage 79.6 K 05 Mar 2010 - 10:40 MarkFeit  
Edit | Attach | Printable | Raw View | Backlinks: Web, All Webs | History: r3 < r2 < r1 | More topic actions
 
Powered by STWiki
This site is powered by the TWiki collaboration platform©1999-2017 by the contributing authors.
You're welcome to copy, print, bend, fold, spindle or mutilate this page for your own personal use. Just don't claim it as your own or sell it.
Ideas, requests, problems regarding STWiki? Send feedback