You are here: STWiki>ST13 Web>QuartetHarness (26 Nov 2016, MarkFeit)Edit Attach

Quartet Harness

Pinout


Wire

Function
Non-ABS
Fuse
ABS
Fuse
Fuse
Capacity1
9-Pin White
Red/Green Unswitched 12V H J 10A
Light Green/Black Switched 12V, Ignition E F 15A
Light Blue Right Turn Signal      
Orange Left Turn Signal      
Green Ground      
3-Pin Black
Red/Green Unswitched 12V H J 10A
Light Green/Black Switched 12V, Ignition E F 15A
Green Ground      
3-Pin Red
Light Green/Black Switched 12V, Ignition E F 15A
Green Ground      
3-Pin White
Red/Black Switched 12V, Main Stop B C 15A
Green Ground      

1Note that the fuses supplying these circuits service other loads and therefore do not make their full rated current available to the harness. Additionally, ground is supplied through a single line the same size as the others. To avoid overheating the wiring and connectors, aggregate load should be kept to less than 15A and it is strongly recommended that the harness be used to supply only low-current loads.

Photo

qh.jpg

Source: http://www.st-owners.com/forums/showpost.php?p=957210&postcount=10

-- MarkFeit - 01 Dec 2005
Topic revision: r3 - 26 Nov 2016, MarkFeit
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding STWiki? Send feedback