You are here: STWiki>General Web>AutoCom (31 Jul 2016, MarkFeit)Edit Attach

Autocom Information

Connector Pinouts

Power Connector

This is the connector used inside the battery compartment of the Pro 7 Sport. The pin numbers are embossed in the connectors (ook very carefully).
1 2 3 4 5 6 7 8 9

Pin Description
1 9V Positive
2 9V Negative
3  
4 VOX Enable
5 PTT Control Common
6 12V Negative
7 See Note Below
8 See Note Below
9 12V Positive

Note: Pins 7 and 8 were at one time believed to be PTT when shorted. The 12V cable jumps these two pins, so it's more likely they're a voltage select.

9V Cable (Included with Pro 7 Sport)

Pin Description
1 9V Positive
2 9V Negative
3  
4 Pin 4/5 Jumper
5 Pin 4/5 Jumper
6  
7  
8  
9  

12V Cable (Part 152)

Pin Description
1  
2  
3  
4 Pin 4/5 Jumper
5 Pin 4/5 Jumper
6 12V Negative
7 Pin 7/8 Jumper
8 Pin 7/8 Jumper
9 12V Positive

Headset Connector

autocom-hs.png

Bike-to-Bike / AUX Connector

autocom-aux.png

Other Useful Information

The connectors used for the power connector and headers for the headset and radio pigtails are JST (http://www.jst.com) EH series. They are known to be available from Digi-Key (http://www.digi-key.com).

-- MarkFeit - 13 Mar 2006
Topic revision: r11 - 31 Jul 2016, MarkFeit
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding STWiki? Send feedback